High performance 3 in 1 Plastic Honeycomb Dehumidifier Dryer with
Best price to worldwide
Why should use 3 in 1 Dehumidifier dryer Machine in plastic
Most engineering plastics are hygroscopic, such as PET, nylon, PC,
etc. When the plastic is taken out of the moisture-proof sealed
packaging bag and exposed to the atmosphere, it starts to absorb
moisture from the atmosphere, and the general traditional hot-air
bucket drying The dryer uses external air with moisture to dry the
plastic, so it cannot prevent the plastic from continuing to absorb
Most of the bad problems encountered in molding are that the
plastic is not sufficiently dehumidified and dried before molding.
Long-absorbent plastics such as PET, PBT, and nylon require
ultra-low dew point drying equipment to dehumidify.
The problems often encountered in the molding of these plastics
are: air bubbles, silver bars, flow marks, cracks, insufficient
transparency, sticky burning, insufficient physical strength of the
product, insufficient dimensional stability, internal stress, and
In addition, when the material is melt-molded, excessive moisture
will cause a hydrolysis reaction, which will reduce the material
quality and reduce the impact and strength of the molded product.
These will make it impossible to recycle the recycled materials and
cause waste of raw materials.
Description of the dryer dehumidifier conveyer all-in-one compact dryer
The "Three-in-One" compact dryers combine drying, dehumidifying,
and two-stage conveying function in a single unit. They are
suitable for drying hygroscopic engineering plastics, such as PA,
PC, PBT, PET etc. A honeycomb rotor is used in the dehumidifying
Features of the dryer dehumidifier conveyer 3-in-1 dryer,
TCD series compact dryers are equipped with honeycomb rotor for
dehumidifying. They have two kinds of design: Fully-integral and
semi-integral depending on the size.
Suitable for drying hygroscopic engineering plastics such as PA,
PC, PBT, PET etc.
Integration of dehumidifying, drying, and two-stage conveying
functions in a single unit. Three-stage conveying is also available
as an option.
Insulated drying hopper features dry air down-blowing and cyclone
exhaust design. This improves drying efficiency and reduces energy
consumption which maintaining a steady drying effect.
Closed-loop conveying system eliminates the possibility of moisture
re-absorption during material conveying.
The dehumidifying section of TCD series features two condensers to
ensure a low return air temperature and low dew-point.
Equipped with pneumatic shut-off valve to ensure no material
remains in the material line after each loading cycle.
Material processing is controlled via microprocessor as standard
with touch screen PLC control as an option for centralized and
Dew-point monitor can be fitted to monitor and display dry air
Real Dew point
Specification of the dryer dehumidifier conveyer all-in-one dryer,
Process Heater Power(KW i
Process Blower Power [ KW)
Drying Hopper Capacity ( L)
Regen. Heater Power kw
Regen. Blower Power( kw )
Dry Air Capacity (m3/hr)
Conveying Blower Power KW
Dia. of Conveying Hose(inch )
THR-U-E Hopper Receiver( L )
THR-U Hopper Receiver ( L )
1), “*” stands for by-pass at blower air outlet;
2), Power supply: 3 phases, 380V, 50Hz；
Machine color--- blue or white, or others;
Machine brand--- factory brand, OEM brand or no brand;
We do OEM!
We do B2B, B2C!
For more choice, please click the following,
Dryer and loader 2-in-1
Dryer and dehumidifier 2-in-1
Dryer, dehumidifier and loader 3-in-1
Mold sweat dehumidifier